Picnic Table Plans (Page Two)

Picnic Table Plans Material/Cut List

A- (Qty 4) - 2X4 - 36"

B- (Qty 2) - 2X4 - 26 1/2"

C- (Qty 2) - 2X4 - 58"

D- (Qty 9) - 2X6 - 72"

E- (Qty 6) - 2X4 - 10"

F- (Qty 3) - 2X4 - 26 1/2"

G- (Qty 2) - 2X4 - 29"

Assemble A, B, and C as shown in picture below. Use clamps to hold the parts together. When everything is in place nail or screw in 2 1/2" nails or screws. Next drill a 1" hole about 1/2" deep in the center to countersink the washer and nut, pre-drill the hole for the carriage bolt, install carriage bolt, washer, and nut. Repeat the steps to build the opposite side.