Gambrel storage shed trim

[material/cut list] [step 1 Foundation] [step2 Sidewalls] [step 3 Roof frame] [step 4 Front wall and door] [Step 5 Back wall and roof decking] [step 6 Trim] [step 7 Shingles and paint]

Material needed for the gambrel storage shed trim

• 2- 2x6 by 36 inches 20 degree one end 22 1/2 degree other end

• 2- 2x6 x36 inches 22 1/2 degree each end

• 2- 1x6 x36inches 20 degree one end 22 1/2 degree other end

• 2- 1x6 x36 inches 22 1/2 each end

• 8- 1x3 x43 inches

• 2-1x6 x8 feet

Use finishing nails to nail the trim.

The 2 2x6 by 36 inch 20 degrees will go on top to form the peek.

The 2 2x6 by 36 inch 22 1/2 degree each end, will go next. Nail the 1x6 by 8 feet to the sides, and cut the front 2x6 missing piece to length.

Install the 1x6 by 36 inch trim to the top of shed the same manner as the front.

Nail the 8 1x3 by 43 inch trim to the corners.

The trim is now complete, next step will be the roof shingles.